Sharp AR-6023DV - Page 95

AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 12
4) Remove the paper exit tray.
5) Disconnect the harness of the LSU unit and the clamps.
6) Remove the screws fixing the LSU unit. Then, remove the LSU
unit.
NOTE: Instructions at the time of the installation.
a) Insert a hole of LSU in a positioning boss.
b) Fix the four screws on LSU.
c) Remove the LSU to LSU adjustment plate.
d) Tighten four screws.
*Screw disused
TR No. : DCE-1028
From mid-June 2016 production
Screw disused
TR No. : DCE-1028
From mid-June 2016 production
E
D
F
C
D
F
D
F
D
F
C
Positioningboss
E
Checkthatthereisnospacebetween
LSUandLSUadjustmentplate.
*