AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 8
8) When the following display is shown, installation is completed.
Press <Finish> button.
With the above procedures, installation (on Windows XP) of the
integration maintenance program is completed.
<Installation on Windows 2000>
1) Main unit side: Execute simulation No. 49-01 (Flash ROM pro-
gram write mode).
Check that "d" is displayed (or "DOWNLOAD MODE" is dis-
played for the AR-M200/M201) on the operation panel. (Press
and hold [Clear] key and [ZOOM DOWN] key ( ) (or
[ZOOM]/[COPY RATIO] key for the AR-M200/M201) together,
and turn on the power simultaneously.)
2) Connect the machine and the PC with a USB cable.
3) Check that the Found New Hardware Wizard is displayed, and
press <Next> button.
4) Select [Search for a suitable driver for my device] and press
<Next> button.
5) Select [Specify a location] and press <Next> button.
6) Select [Include this location in the search;]. If the search loca-
tion is not the folder which includes the maintenance tool driver
(Mainte.inf), select <Browse>. If the search location is the
folder which includes the maintenance tool driver, press
<Next> button to go to procedure 9).
7) Specify the folder which includes the maintenance tool driver
(Mainte.inf), and press <Open> button.
To Next Page
Loading...
