Sharp AY-AP9KR User Manual

GB-9
ENGLISH
TIMER ON
1
Press the TIMER ON ( ) button
and set the time as desired.
• The time setting will change as you press
the button as follows. Hold the button down
to speed through the setting.
• The orange TIMER lamp (
) on the unit
will light.
• The time setting will count down to show the
remaining time.
Select the mode, temperature and fan speed
setting as desired.
• When the temperature is set with the TIMER
ON, the temperature will show in the display
for 5 seconds and then return to the time
display.
• The unit will turn on prior to the set time
to allow the room to reach the desired
temperature by the programmed time.
(Awaking function)
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
) on the unit will
turn off.
NOTE:
• Timer duration can be set from a minimum half
an hour to a maximum of 12 hours. Up to 9.5
hours, you can set in half-hour increments, and
from 10 to 12 hours, in 1-hour increments.
• The latest time setting will be memorized and will
appear on the remote control display the next
time you set the TIMER OFF or TIMER ON.
• The TIMER OFF and TIMER ON can not be set
together.
• While ONE-HOUR OFF TIMER is set, the TIMER
OFF and TIMER ON setting are unavailable.
• If the ONE-HOUR OFF TIMER is set while the
TIMER OFF or TIMER ON is activated, the TIM-
ER ON or TIMER OFF setting will be cancelled.
TIMER OPERATION
TIMER OFF
1
Press the TIMER OFF ( ) button
and set the time as desired.
• The time setting will change as you press the
button as follows. Hold the button down to
speed through the settings.
• The orange TIMER lamp ( ) on the unit
will light.
• The time setting will count down to show the
remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
) on the unit will
turn off.
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF is set, the temperature
setting is automatically adjusted to prevent the room
from be coming excessively hot or too cold while you
sleep. (Auto Sleep function)
COOL/DRY MODE:
• One hour after the time operation begins, the
temperature setting rises 1°C higher than the
original temperature setting.
HEAT MODE:
• One hour after the timer operation begins, the
temperature setting drops 3°C lower than the
original temperature setting.
0.5h 1.0h 1.5h 10h 11h 12h
0.5h 1.0h 1.5h 10h 11h 12h
1
1
CANCEL
CANCEL

Sharp AY-AP9KR Specifications

General

Type	Split system
Multi-split	Yes
Product color	White
Hose length (max)	10 m
Refrigerating medium	R410A
Air conditioner functions	Cooling, Heating
Cooling capacity in watts (nominal)	820 W
Cooling energy efficiency (EER, W/W)	3.22
Heating energy efficiency (COP, W/W)	3.63
Seasonal efficiency rating (cooling) (SEER)	-
Heating capacity in watts (nominal) (Warmer heating season)	- W
Heating capacity in watts (nominal) (Average heating season)	800 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Design load (cooling)	- kW
Energy efficiency class (cooling)	A
Annual energy consumption (cooling)	410 kWh
Hourly energy consumption (cooling)	3.7 kWh
Hourly energy consumption (heating)	3.6 kWh
Annual energy consumption (heating) (Warmer heating season)	- kWh
Indoor unit type	Wall-mountable
Indoor unit depth	198 mm
Indoor unit width	860 mm
Indoor unit height	292 mm
Indoor unit weight	8500 g
Indoor units quantity	1
Indoor unit noise level (high speed)	54 dB
Outdoor unit depth	250 mm
Outdoor unit width	730 mm
Outdoor unit height	540 mm
Outdoor unit weight	27000 g
Outdoor unit noise level	59 dB