Sharp AY-X36RU - ADJUSTING THE AIR FLOW DIRECTION; Vertical Air Flow Direction; TURBO FAN OPERATION

EN-8
MODE FAN
TURBO
TEMP
DISPLAY
COMFORT
TIMER
ON
TIMER
OFF
ON/OFF
SWING
SLEEP
CLOCK
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button to select the
vertical air ow direction.
: The vertical airow louver will swing.
:The vertical airow louver will swing
the same as
.
: The vertical airow louver
will stop at the selected po-
sition.
To stop at the louver at the desired posi-
tion, press the SWING button after hav-
ing the unit operate in louver swinging( )
condition.
• “ ” will disappear on the remote control.
CAUTION:
Never attempt to adjust the vertical airow louver
manually.
• Manual adjustment of the vertical airow louver
could cause the unit to malfunction.
• When the vertical adjustment louver is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time, this
may result in condensation.
ADJUSTING THE AIR FLOW DIRECTION
TURBO FAN OPERATION
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air ow direction using
the louver lever manually.
OFF
The unit runs at extra high fan speed to reach
the desired room temperature faster.
1
In the COOL or HEAT mode, press the
TURBO FAN button.
• “ ” will be displayed on the remote control.
TO CANCEL
Press the TURBO FAN button again.
• “ ” will disappear on the remote control.
NOTE:
• When the unit is turned off, the use of the TUR-
BO FAN operation will be memorized, and it will
be activated the next time you turn on the unit.
• TURBO FAN operation is not available in AUTO,
DRY or FAN mode.
MODE FAN
TURBO
TEMP
ON/OFF
SWING
SLEEP
1
louver lever
1
AYX36RU_OM_3_lang.indb 8 2014-09-10 19:58:14