Sharp AY-X36RU - TIPS ON SAVING ENERGY

EN-12
Use this mode when the remote control is not
available
TO TURN ON
Press the AUTO(AUX) button.
• The OPERATION lamp ( ) will become green
and the unit will start operating in the AUTO
mode.
• The fan speed and temperature setting are set
to AUTO.
TO TURN OFF
Press the AUTO(AUX) button again.
• The OPERATION lamp ( ) will become red.
AUTO
(AUX)
AUXILIARY MODE
1
Press " " and " " buttons
simultaneously.
• “ “ will be displayed on the remote control.
• When you press any button, “
“ blinks 3
times.
TO UNLOCK
Press " " and " " buttons
simultaneously again.
• “ ” will disappear on the remote control.
LOCK BUTTON
TIPS ON SAVING ENERGY
Below are some simple ways to save energy
when you use your air conditioner.
Set the proper temperature
• Setting too higher or lower than necessary
temperature point will result in increased power
consumption.
Block direct sunlight and prevent drafts
•
Blocking direct sunlight during cooling operation
will reduce power consumption.
• Close the windows and doors during cooling and
heating operations.
Keep lter clean to ensure the most efcient
operation
Turn off the circuit breaker when the unit is
not used for an extended period of time
• The indoor unit still consumes a small amount of
power when it is not operating.
MODE FAN
TURBO
TEMP
ON/OFF
SWING
SLEEP
1
AYX36RU_OM_3_lang.indb 12 2014-09-10 19:58:16