Sharp CD-BA250 - Basic CD Playback; Loading and Starting CD Playback

16
CD-BA250(U)2.fm00/12/4
CD Playback
- Listening to a CD (CDs) -
Listening to a CD (CDs)
This system can play audio CD-R and CD-RW discs just as CD discs, but cannot per-
form recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
z
CDs can be placed on any open position on the disc tray.
z
Be sure to place 3" (8 cm) CD(s) in the middle of the disc positions.
5
Press the OPEN/CLOSE button to close the disc tray.
Total number of tracks
on the CD whose
number is flashing
Total playing time of the CD whose
number is flashing
6
To select the CD you want to listen to first, press one of 1 - 3
buttons on the remote control.
5" (12 cm) 3" (8 cm)
Sound Control (See page 14.)