Sharp CD-C250X BK User Manual

CD MECHANISM SECTION
Perform steps 1, 2, 3, 10, 11, 12, and 13 of the disassembly
method to remove the CD mechanism.
How to remove the loading motor (See Fig. 9-1)
1. Remove the drive belt (Al) x 1 PC., from the motor side.
2. Remove the screws (A2) x 2 PCS., to remove the loading
motor.
(Al )x1
Drive Belt
Figure 9-1
How to remove the select motor (See Fig. 9-2)
1. Removethescrews(Bl)x2pcs., toremovetheselectmotor.
(Bl)x2
02.6 x5mm
How to remove the pickup (See Fig. 9-3)
1. Removethe screws (Cl) x 2 PCS., to remove the shaft (C2)
x 1 pc.
2. Remove the stop washer (C3) x I PC., to remove the gear (C4)
x 1 pc.
3. Remove the pickup.
Note:
After removing the Flexible PWB for the optical pickup from the
connector wrap the conductive aluminum foil around the front
end of Flexible PWB so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
Figure 9-3
-9-

Sharp CD-C250X BK Specifications

General

Brand	Sharp
Model	CD-C250X BK
Category	Stereo System
Language	English