Sharp CD-G14000 User Manual

E-35
ENGLISH
CD-G14000
CD-G17000
CD-G22000
2008/April/25 CD-G14000/17000/22000
Tape Recording
 Recording from a CD or MP3/WMA disc
To stop recording:
Press the (TAPE ) button.
The CD and tape will stop.
TIMER
POWER
ON/ STAND-BY
CD
TUNER
(BAND)
4
3
1
5
4
5
3
2
1
PRESET
TUNING
PRESET
TUNING
VOL.
VOL.
PHONES
RECORD/PLAYBACK
PLAYBACK (PLAY & STOP)
REMOTE
SENSOR
2
TAPE
(1 2)
OPEN/
CLOSE
c
AUDIO
IN
AUDIO
IN
OPEN/
CLOSE
c
4
5
3
2
1
CD
CD
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired
disc.
6 Within 5 seconds, press the / (TAPE ) button to start
recording.
 Recording is started from the selected disc. When the
playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
 Playback of the disc will start approximately 7 seconds after
the tape starts.

Sharp CD-G14000 Specifications

General

Brand	Sharp
Model	CD-G14000
Category	Stereo System
Language	English