Sharp CD1800M

EN-9
* Memory Cooking can be set in 6 operating ways.
There are multiple methods of selecting memories
depending on the input method selected and whether
or not Auto Start is turned on or off. To avoid
mistakenly selecting the incorrect memory, please
confi rm your settings by checking Custom Help (see
Custom Help 1 and 2 on page EN-12).
<6 operating ways>
1. Dual Digit Input/Auto Start OFF (memory 00 - 99)
2. Dual Digit Input/Auto Start ON (memory 00 - 99)
3. Repeat Digit Input/Auto Start OFF (memory 0 - 29)
4. Repeat Digit Input/Auto Start ON (memory 0 - 29)
5. Single Digit Input/Auto Start OFF (memory 0 - 9)
6. Single Digit Input/Auto Start ON (memory 0 - 9)
HELPFUL TIPS for the Display of Memory Input
Status and the START pad
When Auto Start ON has been selected,
1. “0” should be displayed before entering memory
number.
When “0” is not displayed, open the door and
close to reset.
2. The START pad does not need to be pressed.
Cooking will automatically start when the memory
number is input.
2. Dual Digit Input/Auto Start ON (without the Start
pad)
* Suppose you want to cook with memory 12, which
was programmed for 10 seconds at 100%.
Procedure
1 Place food in the oven.
Enter memory number.
1 2
Procedure
0 2
2 Press the START pad.
1 Place food in oven.
Enter memory number.
START
1. Dual Digit Input/Auto Start OFF (with the Start
pad)
* Suppose you want to cook with memory 2, which was
programmed for 1 minute at 100%.
3. Repeat Digit Input/Auto Start OFF (with the Start
pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 100%.
Procedure
2
2 Press the START pad.
1 Place food in oven.
Enter memory number.
START
4. Repeat Digit Input/Auto Start ON (without the Start
pad)
* Suppose you want to cook with memory 12, which
was programmed for 10 seconds at 100%.
Procedure
1 Place food in oven.
Enter memory number.
x 2
2
5. Single Digit Input/Auto Start OFF (with the Start
pad)
* Suppose you want to cook with memory 2, which was
programmed for 1 minute at 100%.
Procedure
2
2 Press the START pad.
1 Place food in oven.
Enter memory number.
START
6. Single Digit Input/Auto Start ON (without the Start
pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 50%.
2
Procedure
1 Place food in oven.
Enter memory number.
Cooking Double/Triple
Quantity with Memory
Double/Triple Quantity is a feature where the oven will
automatically calculate how to cook two or three servings
of a programmed food. It does not simply double or
triple the time. Factory setting is multiplication factor
1.8 for double quantity and 2.6 for triple quantity. Press
the DOUBLE/TRIPLE QUANTITY pad once for Double
Quantity (2 servings), and twice for Triple Quantity (3
servings).
* Suppose you want to cook 3 servings with memory
number 2 programmed Single Digit Input/Auto Start
ON.
Procedure
1 Place food in oven.
Press the DOUBLE/TRIPLE
QUANTITY pad twice.
2
2 Enter memory number.
x 2
x2/x3
NOTE : If your total cooking time is over the maximum
time allowed, error message EE9 will be displayed. Press
the STOP/CLEAR pad to clear the error message and
reduce the quantity or cook without using Double/Triple
Quantity. For details see Custom Help 10 on page EN-16
and Maximum Cooking Time on page EN-22.