EN-21
1 Press the SET MEMORY pad
twice within 2 seconds.
NO.
X 2
6 Press the STOP/CLEAR pad.
5 Press the SET MEMORY pad.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear
the error code, press the STOP/CLEAR pad and
re-program. See Maximum Cooking Time on page
EN-22.
3. Refer to Defrosting 2 and 3 on page EN-27.
4 Enter cooking time.
DEF.
3 0 0 0
2 Enter memory number.
NO.
0 2
3 Press the EXPRESS DEFROST pad.
DEF.
Procedure Display
STOP
CLEAR
Setting Total Cooking Time of Express
Defrost
* Suppose you want to set the total cooking time of
Express Defrost to 30 minutes with memory 2 using
Dual Digit Input.
* Suppose you want to set the Total Cooking Time of
Express Defrost to 30 minutes with memory 2 using
Single Digit Input.
2
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NO.
NO.
NOTES:
1. Follow steps 3-6 on the left side of page EN-21 to
complete.
2. Press the SET MEMORY pad twice within 2
seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear
the error code, press the STOP/CLEAR pad and re-
program. See Maximum Cooking Time on page EN-
22.
4. Refer to Defrosting 2 and 3 on page EN-27.
* Suppose you want to set the Total Cooking Time of
Express Defrost to 30 minutes with memory 12 using
Repeat Digit Input.
Procedure Display
NO.
NO.
2 2
Procedure Display
1 Press the SET MEMORY pad
twice within 2 seconds.
2 Enter memory number.
NOTES:
1. Follow steps 3-6 on the left side of page EN-21 to
complete.
2. Press the SET MEMORY pad twice within 2
seconds.
3. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear
the error code, press the STOP/CLEAR pad and
re-program. See Maximum Cooking Time on page
EN-22.
4. Refer to Defrosting 2 and 3 on page EN-27.
SET
MEMORY
EXPRESS
DEFROST
SET
MEMORY
X 2
SET
MEMORY
X 2
SET
MEMORY
To Next Page
Loading...
Need help?
General
