E-1
ENGLISH
CP-SW1000W
ENGLISH
General Information
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It
will guide you in operating your SHARP product.
When the ON/STAND-BY button is set at STAND-BY position,
main voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the
unit may be brought into operation by the remote control.
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service op-
eration and when not in use for a long period.
To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
Do not turn the volume on to full at switch on. Listen to music at
moderate levels.
This subwoofer incorporates the Tymphany Linear Array
Transducer ( LAT ) technology developed by Tymphany Corporation.
This Technology uses a linear array of multiple smaller diaphragms
to generate sound as opposed to the single diaphragm used in the
conventional cone speakers. Such arrangement enables:
Powerful low bass without the need for large enclosures
compared to the conventional speakers, hence the sleek and
compact design of this subwoofer.
Minimisation of structural vibrations which makes it possible to
place the subwoofer close to your audio system without affecting
the critical circuitry.
Please confirm that the following accessories are included.
Remote control x 1 Cleaning cloth x 1
RCA cable (2 pins - 2 pins) x 1 RCA cable (1 pin - 2 pins) x 1
AC power lead x 1
AC power lead x 1
(for Saudi Arabia only)
AC power lead x 1
(for Taiwan only)
Plug adaptor x 1
(for Saudi Arabia only)
Plug adaptor x 1
(for Central and South
America and Mexico only)
Subwoofer stand x 2
Foot cushion x 4 Spike x 4
To Next Page
Loading...
