E-21
ENGLISH
DV-SL1000W
Select the correct colour system (TV standard).
A screen saver appears.
The screen saver is disabled.
The screen mode should be set according to the
connected TV type (for details, see page 25).
Change the password (for details, see page 26).
Sets a restriction level for DVD viewing (for details, see
page 26).
Enter a 4-digit password.
It is set to 0000 by default.
This resets all setting, except for PARENTAL to the
factory defaults.
The setting is completed.
TV SYSTEM NTSC* (PHILLIPINES)
PAL*
AUTO
DEFAULT RESTORE
EXIT SETUP –
PASSWORD
PARENTAL LEVEL 1
↓
LEVEL 8*
SCREEN SAVER ON*
OFF
TV TYPE 4:3PS*
4:3LB
16:9
HH
HH
H
Change the system with conventional TV connecting
I If you use a conventional TV, you must select the INTERLACE (I) mode.
I INTERLACE mode is use for a normal video output.
I For conventional TV connection, please refer to page 11.
HH
HH
H
Change the system to a TV with Progressive-Scan
I If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD Video Player (see page 12), you must
select the PROGRESSIVE-SCAN (P-SCAN) mode. (page 24)
Changing the system setup (continued)
Preparation for Use
SYSTEM SETUP
Setup menu Selectable parameters (* indicates default settings.) Description
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital’s dynamic range control allows you to adjust the sound range
.
Caution:
Make sure the unit is on the STOP condition before changing the Interlace or P-Scan (Progressive Scan) mode.
DV-SL700 17-24 2/9/06, 2:28 PM21
To Next Page
Loading...
