Sharp DV-SL1000W - CD operation; To play in the desired order (programmed play)

E-40
ENGLISH
DV-SL1000W
CD operation
The following playback functions are the same as DVD or VCD opera-
tions.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . 30
Fast forward/Fast backward (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To play the contents between the specified points repeatedly
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
To start playback from the desired point (direct play) . . . . . . . . . . . . .. . . . 31
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
I Press the STOP (7) or PROGRAM button in the stop or play mode twice.
I Switch the input or remove the discs.
I Select “CLEAR” at PROGRAM menu and press ENTER.
Notes:
I Programming is not possible whilst paused.
I Sequential programming does not work if the disc disables programming or
does not have track information.
I During programmed play, repeat play can be performed by pressing the RE-
PEAT button.
I Program menu only can appear on screen at stop mode for JPEG format
when press PROGRAM button.
I Programming (program menu) cannot be access during playback mode for
JPEG format.
2Enter a track and chapter number with the DIRECT
NUMBER buttons.
The PROGRAM screen show as follows on SVCD VCD CD:
TV screen
I Repeat the procedure above to enter other track numbers by pressing
5, ∞, 2 or 3 cursor.
I If you enter the wrong number, you can change the title/track number
by pressing DIRECT NUMBER buttons.
I If the track number is 2 digits or more, example track 12, just press “1”
and “2” by DIRECT NUMBER buttons.
3 Select “PLAY” at the PROGRAM menu and press
ENTER to start play.
CD, CD-R and CD-RW Operation
PROG
PLAY CLEAR
PROG
PLAY CLEAR
0001
0010
0100
You can playback the desired tracks in a specific order.
Maximum of 16 tracks can be programmed.
H To play in the desired order (programmed play)
1 Whilst in the stop mode, press the PROGRAM button.
The PROGRAM screen show as follows on SVCD VCD CD:
TV screen
CD, CD-R and CD-RW Operation
DV-SL700 40-52 2/9/06, 2:39 PM40