E-26
ENGLISH
DV-SL1000W
Changing the system setup (continued)
Preparation for Use
H Parental setting
1 Select “SYSTEM SETUP” on the Setup menu screen (see steps 1 - 4
on page 20).
2 Before setting “PARENTAL”, ensure password is unlock “ ”. The
“PARENTAL” level can’t be setting if the password is lock “ ”.
3 After selecting “PARENTAL” in steps 1 - 4 on page 20, select the
parental level and press the “ENTER” button to confirm.
4 After enter parental level, select “PASSWORD” to lock the password
key.
5 Enter a 4-digit password using the DIRECT NUMBER buttons and press
the ENTER button.
* If this is the first time, enter “0000” as factory default password.
H Password setting
From the setup menu, select “SYSTEM SETUP”, “PASSWORD” and choose
“_ _ _ _ ”.
* Level 1 : for most restrictive viewing ==> Level 8 : for general audiences
viewing.
The smaller the number, the greater the level of restriction.
Note:
Whilst playing a disc with parental lock, the display may appear requesting a
password in order to watch some restricted scenes. In such case, enter the
password to temporarily change the parental level.
Indicator Setting
Level 1 Adult viewing.
Level 2 NO ONE 17 AND UNDER ADMITTED.
Level 3 RESTRICTED Under 17 requires accompanying parent or adult
guardian.
Level 4 Reserve.
Level 5 PARENTS STRONGLY CAUTIONED Some material may be
inappropriate for children under 13.
Level 6 PARENTAL GUIDANCE SUGGESTED Some material may not
be suitable for children.
Level 7 Reserve.
Level 8 GENERAL AUDIENCES All ages admitted.
1 For the first time setting the password, enter the factory default
password by pressing “0000”.
2 Enter own new password (maximum 4 digit) using the DIRECT NUM-
BER buttons.
3 Enter again same own new password buttons.
Press ENTER button to return.
The “ ” will be unlock as show in picture (b).
4 Exit setup. The “ ” will be lock after exit setup menu.
Note:
When you forget your password, cancel the current password by
pressing “0000” using the DIRECT NUMBER buttons (0 - 9).
Picture (a) Picture (b)
DV-SL700 25-39 2/9/06, 2:37 PM26
To Next Page
Loading...
