E-23
ENGLISH
DV-SL1000W
CONTRAST 12
10
8
6*
4
2
0
AUDIO SETUP
DIGITAL OUT RAW*
PCM
Preparation for Use
Changing the system setup (continued)
Setup menu Selectable parameters (* indicates default settings.) Description
• Highlight the DIGITAL OUT option, and press the
1, 2, 5 or 4 buttons to choose the audio output
mode you prefer. Press ENTER to confirm.
• RAW: Choose this setting if your DVD player is
connected to a power amplifier with a coaxial
cable; When playing a disc recorded with Dolby
Digital, DTS and MPEG audio formats, the
corresponding digital signals will be output from
the Coaxial Output socket. This Player’s digital
output sockets are designed for a connection to a
Dolby Digital, DTS, or MPEG receiver or decoder.
• PCM: Choose this setting if your DVD player is
connected to a 2-channel digital stereo amplifier;
When playing a disc recorded with Dolby Digital
and MPEG audio formats, audio signals will be
modulated into 2-Channel PCM signal, and it will
be output from the Coaxial Output socket.
VIDEO SETUP
BRIGHTNESS 12
10
8
6*
4
2
0
To adjust TV screen brightness level.
To adjust TV screen contrast level.
DYNAMIC RANGE FULL
6/8
4/8
2/8
OFF*
EXIT SETUP –
DYNAMIC RANGE:
If adjusting to FULL, the audio signal peak value will
be the minimum; whilst adjusting to OFF, maximum.
The setting is completed.
DV-SL700 17-24 2/9/06, 2:28 PM23
To Next Page
Loading...
