10
CES125
CES126
CES127
CES128
Using the Copier Function
❖ Making 2-sided Copies
This function is only available when the original is set in the ADF, not when it is set on the •
exposure glass.
Paper must be fed from tray 1 or tray 2, not from the bypass tray. In addition, paper size must •
be A4, B5, Letter, Legal, Executive, 8" x 13", 8
1
/
2
" x 13", Folio, or 16K, and paper type must
be thin, plain, middle thick, recycled, color, preprinted or prepunched.
You can set the machine to copy in 2-sided copy mode.
Press the [Copy] key.1.
Press the [ 2. ][ ] keys.
Press the [ 3. ][ ] keys to select [2 Side Copy], and then press the [OK] key.
Press the [ 4. ][ ] keys to select the printout format, and then press the [OK] key.
Press the [User Tools] key to return to the initial screen. 5.
“2 Sided Copy” appears on the display, indicating that the machine is now in 2-sided
copy mode.
The following types of printout format can be selected depending on your prefer-
ence.
Printout formats for Top-to-Top copying
[Top to Top
] [Top to Top ]
Printout formats for Top-to-Bottom copying
[Top to Bottom ] [Top to Bottom ]
After this function is set, all subsequent copies will be 2-sided, unless you cancel the setting •
by selecting [Off] for [2 Side Copy].
Advanced Photocopy Settings
To Next Page
Loading...
