14
Using the Scanner Function
Press the [B&W Start] key or the
[Color Start] key.
Depending on the machine’s settings, you
may see the screen on the right on the
display when scanning from the exposure
glass. If you see this screen, proceed to
the next step.
CES169
If you have more originals to scan, place the next original on
the exposure glass, and then press [Yes]. Repeat this step
until all originals are scanned.
When all originals have been scanned, press [No] to start
sending the scanned fi le.
Initial Screen and Basic Operation
To Next Page
Loading...
Need help?
General
