Sharp DX-C200 Quick Guide

26
Troubleshooting
Message
(alphabetical order)
Causes Solutions
Unsupported USB
Hub Please Remove
The Scan to USB
function failed be-
cause a USB device
other than a USB
fl ash disk or a USB
fl ash disk with an un-
supported fi le system
was used.
Use a USB fl ash disk that is
compatible with the Scan to
USB function.
USB Disconnected
Press Clear key
The Scan to USB
function failed be-
cause the USB fl ash
disk was removed
before the operation
could be completed.
Check that the USB fl ash disk is
securely inserted in the ma-
chine. Do not pull out the USB
fl ash disk until "Ready" appears
on the display.
USB Memory
Overfl ow Press
Clear key
The Scan to USB
function failed be-
cause there was not
enough memory on
the USB fl ash disk.
Use a USB fl ash disk with
enough memory.
Write Protect Press
Clear Key
The Scan to USB
function failed
because the machine
could not access the
USB fl ash disk
properly.
Use a USB fl ash disk that is not
password- or write-protected.
Error and Status Messages on the Screen

Sharp DX-C200 Specifications

General

Brand	Sharp
Model	DX-C200
Category	Printer
Language	English