RAD: Radian mode symbol
Appears when the radian mode is designated.
GRAD: Grad mode symbol
Appears when the grad mode is designated.
s a : LEARN mode symbol
Appears when learn mode is set.
LOOK: Intermediate result indication symbol
Appears when the [mfJ keys are depressed in the learn mode or when an
answer is displayed during calculation.
S H il: Statistical calculation mode symbol
Appears when statistical calculation mode is set.
( ): Parenthesis symbol
Appears when a calculation with parenthesis is performed by depressing the
n~l key.
HEX: Hexadecimal symbol
Appears when an answer in hexadecimal notation is displayed.
f fjj j : Variable input symbol
Appears when the Jx) key is pressed in the LEARN mode or when the entry
of a variable is required while a calculation is executed according to a stored
mathematical formula. The number in brackets shows where a variable
concerned standards in the list of variables, randing from "1 " to "9 " and
"A " ~ "F ".
For variable No. 16 and the subsequent, the symbol is displayed instead
of a numeral.
|: Formula number indicator
Appears when formula reserve function is used.
Display system
This machine displays a calculation result (jc), if it is within the following range, in the
floating decimal point system.
0.000000001 < lx I ^ 9999999999
79
To Next Page
Loading...
