Sharp ER-A440 - PROGRAMMING; Direct Programming

File table (In the ER-A610, the shaded section ( ) of the FUNCTION KEY LIST is not used.)
Table
No.
File name
RECORD BLOCK
Label
size
Data
size
MRS Max. #1 MRS Max. #2
1 Dept. Preset 20 50 1 1 1 6
2 Price 20 50 (1) 1 1 0 3
3 Text (8chra.) 0 50 (1) 0 1 0 8
4 Text (12chara.) 25 50 (1) 1 1 0 12
5 Text (16chara.) 0 50 (1) 0 1 0 16
6 Daily 20 50 (1) 1 1 0 9
7 Term 20 50 (1) 1 1 0 9
8 PLU Preset 950
11 5 6
9 Price 950
(8) 1 1 0 3
10 Text (8chra.) 0
(8) 0 1 0 8
11 Text (12chra.) 950
(8) 1 1 0 12
12 Text (16chra.) 0
(8) 0 1 0 16
13 Daily 950
(8) 1 1 0 9
14 Term 0
(8) 0 1 0 9
15 Link PLU 50
11 315
16 Transaction Label 83 83 1 1 2 0
17 Daily 83 83 (16) 1 1 0 8
18 Term 83 83 (16) 1 1 0 8
19 Cashier Preset 4 99 1 1 1 3
20 Flag 4 99 (19) 1 1 0 2
21 Text 4 99 (19) 1 1 0 8
22 Cashier transaction Label 42 42 4 99 (19) 2 0
23 Daily 42 42 (22) 4 99 (19) 0 8
24 Term 42 42 (22) 4 99 (19) 0 8
25 Total cashier (Buffer) Label 42 42 1 1 2 0
26 Total 42 42 (25) 1 1 0 8
27 Hourly Label 48 48 1 1 1 0
28 Daily 48 48 (27) 1 1 0 8
29 Daily net Label 36 36 1 1 3 0
30 Total 36 36 (29) 1 1 0 8
31 Reg. buffer 80 255 1 1 0 36
(#1) : Same as the number of record of table no. N
(#2) : Same as the number of block of table no. N
[JOB#996, 998] RAM DATA BACKUP function
(ECR↔ECR, ECR↔ER-02FD)
[JOB#996] RAM data send
X : SSP = 0
Standard RAM (64KB) = 1
Optional RAM: ER-03RA (512KB) = 2
[JOB#998] RAM data receive
996
X
@/FOR
All data
CA/AT
SBTL
Send to ECR or ER-02FD
(Baud rate setting:#903-A)
Send to ECR
(Auto baud rate setting)
998
@/FOR
CA/AT
SBTL
Receive from ECR or ER-02FD
(Baud rate setting:#903-A)
Receive from ECR
(Auto baud rate setting)
– 14 –