Sharp ER-A440 - Programming Rate for Conversion Key; Programming for Media Keys and Function Keys; Data, Time Programming; Tax Table Programming

10) PROGRAMMING RATE FOR CONVERSION KEY
XXXX.XXXX: 0.0000 to 9999.9999
MRS = 0.00000
11) PROGRAMMING FOR MEDIA KEYS &
FUNCTION KEYS.
A: Mantissa (0 to 9)
B: Exponent (0 to 8)
MRS = 18 digits. (RA, PO, CASH2, CHn, CHKn)
17 digits. (TAX)
12) DATA, TIME PROGRAMMING.
DATE: date entry format follows SRV Programming (6 digits)
TIME: 24 hour system (4 digits)
MRS = DATA: 01/01/00
TIME: 00:00
13) TAX TABLE PROGRAMMING
72 BREAKPOINTS CAN BE PROGRAMMED FOR EACH TAX-
TABLE.
(Case of interval between break point is 1 dollar or more and less
than 100 dollar, 36 breakpoints is programmed for each table.)
DEPRESSION OF THE SBTL KEY AT THE FOLLOWING POINTS
MEANS A TAX TABLE DELETE OPERATION.
A: INTERVAL BETWEEN BREAKPOINTS
1 DOLLAR OR MORE AND LESS THAN 100 DOLLAR = 1
BELOW 1 DOLLAR = 0
B: TAX TABLE No.
TABLE 4/TABLE 3/TABLE 2/TABLE 1 = 4/3/2/1
TAX RATE : 0.0000 ~ 99.9999
CYCLE : 0 ~ 9999
INITIAL TAX : 0 ~ 999
LOWER TAX LIMIT : 0 ~ 99999
BREAK POINT : 0 ~ 99999
MRS = NO TAX
CNV1
Not changed
XXX.XXX
CNV2
CNV3
CA/AT
SBTL
RA
Not changed
PO
CASH2
CHn
CHKn
TAX
AB
CA/AT
@/FOR
TAX
XXXXXX
HHMM
DATA
TIME
#
XXXXXX
@/FOR
AB
@/FOR
Declaration of TAX
TAX rate
XXX @/FOR XXXX
@/FOR
Initial TAX Cycle
XXXXX @/FOR XXXXX @/FOR
Break point Lower TAX limit
CA/AT
TAX
– 34 –