ER-A520U/A530U Service mode programming
3 – 9
[JOB#929] ER-A520: MRS = 0000
ER-A530: MRS = 0000
#929-A: 1. Media Key KP print format when finalizing (Expeditor)
Note: Based on each media's preset.
#929-B: 1. Server and General report resetting allowed with open
Guest Checks.
#929-C: 1. When Closed Check file is full
#929-D: 1. Taxable status of PLU/UPC (EAN) which are set as "non-
taxable" in PGM mode
[JOB#980] ER-A520: MRS = 0000
ER-A530: MRS = 0001
#980-A: 1. Not used (Fixed at “0”)
#980-B: 1. Hash department entries effect the Hourly Report totals
#980-C, D: Not used (Fixed at “00”)
[JOB#930~939] ER-A520: MRS = 0000
ER-A530: MRS = 0000
RESET REPORT COUNTER
[JOB#942, 943, 969] ER-A520: MRS = 0000000000000
ER-A530: MRS = 0000000000000
GT COUNTER PRESETTING
Note: The GT1 is obtained by the following calculation
Equation: GT1=GT2-GT3
[JOB#944] ER-A520: MRS = 0000
ER-A530: MRS = 0000
PGM2 mode secret code presetting
Note: When the secret code “0” is programmed, the secret code entry
is inhibited.
[JOB#948] ER-A520: MRS = 00
ER-A530: MRS = 00
PROGRAMMING OF THE TRAINING SERVER/CASHIER NO.
XX: Server/Cashier No.
[JOB#949] ER-A520: MRS = “**TRAINING**”
ER-A530: MRS = “
**TRAINING**”
THE TRAINING MODE’S TITLE
[JOB#950] MRS = STANDARD KEY LAYOUT
Free key layout (Except for department keys and direct PLU keys.)
1. Media Key KP print format when finalizing 929-A
Simple 0 ★
Detail 1
1. Server and General report resetting allowed with
open Guest Checks.
929-B
No 0 ★
Yes 1
1. When Closed Check file is full 929-C
Inhibit registration 0 ★
Registration is continued 1
1. Taxable status of PLU/UPC (EAN) which are set
as "non-taxable" in PGM mode
929-D
NON-TAXABLE 0
ACCORDING TO ITS ASSOCIATED DEPT 1
1. Hash department entries effect the Hourly Report totals
980-B
No 0 ★
Yes 1
JOB # Function
930 General Z1 report counter
933 Hourly Z1 report counter
934 PLU Z1 report counter
935 Cashier Z1 report counter
936 GLU/PBLU Z1 report counter
937 General Z2 report counter
939 Daily net Z2 report counter
Job#
XXXX
Initial value of Z counte
"0"
CA/AT
@/FOR
JOB # Function
942 GT2 (Positive GT)
943 GT3 (Negative GT)
969 Training GT
XXX: 1 to 130
999 (to inhibit the key)
Job#
0000000000000
13 digi
ts
0
CA/AT
@/FOR
944
XXXX
4 digits
0
CA/AT
@/FOR
948
XX
0
CA/AT
@/FOR
949
Character Key
(12 chara.
)
Spac
e
CA/AT
@/FOR
950 Free key
Function code automatically
increments
XXX
Key No.
To inhibit
Increment Key No.
CA/AT
SBTL
@/FOR
@/FOR
Function code is manually
entered
Initial setting
To Next Page
Loading...
