Sharp ES-NFB8141WD-EN - Program Control and End

EN - 19
5.8 Child Lock
The Child Lock function allows you to
lock the buttons so that the wash cycle
you have chosen cannot be changed
unintentionally.
To activate child lock, press and hold
button 2 and 3 simultaneously for at
least 3 seconds. ‘’CL’’ will flash on the
electronic display for 2 seconds when the
child lock is activated.
If any button is pressed or selected
program is changed by the program dial
while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and a
program is running, when the program
dial is turned to the CANCEL position
and another program is selected the
previously selected program continues
from where it was left.
To deactivate the child lock, press and
hold button 2 and 3 simultaneously for at
least 3 seconds until the “CL” symbol on
the electronic display disappears.
5.9 Cancelling the Program
To cancel a running program at any
time:
1. Turntheprogramdialtothe“STOP”
position.
2. Yourmachinewillstopthewashing
operationandtheprogramwillbe
cancelled.
3. Turntheprogramdialtoanyother
programtodrainthemachine.
4. Yourmachinewillperformthe
necessarydrainingoperationand
cancel the program.
5. You can now select and run a new
program.
5.10 Program End
Yourmachinewillstopbyitselfassoon
as the program you have selected
finishes.
•
“”willflashontheelectronicdisplay.
• Youcanopenthemachine’sdoorand
remove the laundry.
•
Leavethedoorofyourmachineopen
toallowtheinnerpartofyourmachine
to dry.
•
SwitchtheprogramdialtoSTOP
position.
•
Unplugyourmachine.
• Turn the water tap off.