Sharp ES-U10HT User Manual

1. Press
POWER
ON/OFF key.
2. Press COURSE key,
and select the necessary
course.
3. Press RESERVE key,
and set the time as desired.
4. Press
START/
PAUSE key.
Display represents reservation
t
ime: 1hr !" 24hrs.
1. Press
POWER ON/OFF key.
2. Press SOAK key, and set
the soaking time as desired.
3. Press
START / PAUSE key.
RESERVE
SOAK
7. The machine generates a beep and turns off when i
t finishes the course.
6. The time setting counts down to show the remaining time.
4. The machine generates a beep and turns off when it finishes the course.
5. Start the reservation program.
Display represents soaking time
(
11 steps):
5min !" 10min !" 20min !" 40min
!" 60min !" 2hrs !" 3hrs !" 4hrs
!" 8hrs !" 12hrs !" 24hrs
Additional operating procedure
11
10
2
3
Put the clothes in the tub,
and press Power ON/OFF key.
Before starting of rinsing, please select [ Water level ].
Select the course as necessary .
Put in detergent as necessary,and close the top cover properly.
Only spinning
Only draining
Reuse of detergent liquid
Self-decided washing course
Only spinning etc.
Select the necessary processes.
In the cases below
(In case of only draining, please keep the top cover open.
The machine displays [E2] when it finishes draining.
)
(There is detergent liquid left in the tub)
Press START/PAUSE key.
1
Only rinsing and spinning
Ex.

Sharp ES-U10HT Specifications

General

Brand	Sharp
Model	ES-U10HT
Category	Washer
Language	English