Sharp ES-U10HT - Things to Know Before Washing; Maintenance; Water Inlet Hose Connecting Port; Lint Filter Box

Tub side
138
Things to know before washing
Select the course depending on kinds of clothing or degree of dirt on clothing.
After pressing START/PAUSE key once, you can not change the course. When you
want to change the course, turn off the power and select the course as desired again.
Blinking display indicates the step in running, lighting display indicates the course
selected.
When motor get hot beyond a safe limit, it fail-safes on it and stops the running.
Do not use more than 3 continuous runs.
1. When it fail-safes on the motor,
it stops running.
After cooling down, it can be used
normally.
2. When top cover is not closed
surely, the machine can not run.
Please put cover handle down
with care.
Maintenance
Lint filter box
Clean it each time washing is finished.
3. Confirm if
top cover is
closed.
4. Press START
/PAUSE key.
1. Detach lint filter box from washing tub.
2. Clean lint filter box and the
tub side.
3. Attach lint filter box on washing
tub to a downward direction.
1. Turn off
the faucet.
2. Turn on the
power and
press WATER
LEVEL key.
The water in the hose has been
draind about 10 min later.
Then turn off the power.
5. Dismantle water
inlet hose.
Caution
For the prolonged use, the filter net is very easily blocked. Please clean it in the following way.
6. Clean the filter net.
Water inlet hose connecting port
It is possible to extend a life of washing machine with an appropriate maintenance.
1. Each time after washing, please turn off the faucet and power. (If necessary,
please dismantle water inlet hose.)
2. Please wipe the water in the tub away after washing as soon as possible.
3. Be sure to pull out the plug from the plug socket during maintenance.
4. Hanging Power cord and drain hose is desirable.
5. Please open top cover for about 1hour after wiping the water and the persistent dirt in the tub away cleanly
with clean and soft cloth.
6. Please do not use solvents such as alcohol, cleanser and so on, because they may cause damage to
the surface of the tub.
Washing / Spin Drying tub
Remove the filter net
and clean it.
Twist connecting part,
not hose.
Caution