FO-4450U/FO-CS1
1 Header registration On Off 0
2 Reserved 0
3 Continuous serial polling On Off 0
Time interval for continuous serial polling OPTION
SW64
0 min. 30 min. 60 min. 120 min.
When SW64
-No.3
4 No. 4 0 0 1 1 0
is on, option setting
5 No. 5 0 1 0 1 0
can be set up
6 Reserved 0
7 Reserved 0
8 Quick on line function Yes No 1
Cassette selection Manual Auto-1 Auto-2 Auto-1 OPTION
1 No. 1 0 0 1 1 0
2 No. 2 0 1 0 1 1
The 1st priority cassette None Tray
1st Cass. 2nd Cass.
Tray OPTION
3 No. 3 0 0 0 0 Other 0
SW65
4 No. 4 0 0 1 1
Combination
1
5 No. 5 0 1 0 1 0
The 2nd priority cassette None Tray
1st Cass. 2nd Cass.
Tray OPTION
6 No. 6 0 0 0 0 Other 0
7 No. 7 0 0 1 1
Combination
1
8 No. 8 0 1 0 1 1
1 Reserved 0
2 Reserved 0
3 Reserved 1
Cassette selection of separate page None Tray
1st Cass. 2nd Cass.
OPTION
SW66
4 No. 4 0 0 1 1 0
5 No. 5 0 1 0 1 1
6 Reserved 0
7 Maximum size of input document 38 inch 19 inch 1
8 Print hold function On Off 0
Power save mode OFF ON OPTION
1 No.1 0 0 0
2 No.2 0 1 0
Density adjustment of print bias Binary input 4 2 1 set to 1~7.
3 No. = 3 4 5 (Data No.) 1: faint 6: deep 1 set to 0, is
SW67
4 EX 1 0 0 0 equal to 4
5 eg. Bias is set to level 4. 0 (100)
Drum life detection
No Detection
Over only
Near and Over Near and Over
6 No. 6 0 0 1 1 1
7 No. 7 0 1 0 1 1
8 Reserved 0
Distinctive ring pattern U.S.A. Canada Australia Hong Kong
For For
U.S.A. Canada
1 No. 1 0 0 1 1 0 0
2 No. 2 0 1 0 1 0 1
SW68
3 Reserved 1
4 Reserved 1
5 Reserved 0
6 Reserved 0
7 Reserved 1
8 Reserved 0
SW
NO.
DATA
NO.
ITEM
Switch setting and function
Remarks
Initial
setting
10
It is effective
only when
No.31-1/2 are
set up of manual
It is effective
only when
No.31-1/2 are
set up of manual
2 – 21
To Next Page
Loading...
