To Next PageTo Next PageWhy is the received document faint on my Sharp Fax Machine?
If the received document is faint on your Sharp Fax Machine, make sure you are using the recommended fax paper. You can also ask the other party to send higher contrast documents. If the contrast is still too low, your fax may have a problem. Make a copy to check it.
Why is dialing not possible on my Sharp UX-108 Fax Machine?
If you cannot dial with your Sharp Fax Machine, ensure the power cord is properly plugged into a power outlet and that the telephone line is correctly connected to both the TEL. LINE jack and the wall jack. Also, verify that the fax is set to the correct dialing mode for your telephone line.
How to fix nothing appearing on Sharp UX-108 Fax Machine display?
If nothing appears on the display of your Sharp Fax Machine, make sure the power cord is properly plugged into a power outlet. Also, connect another electrical appliance to the outlet to see if it has power.
Why is my Sharp UX-108 not transmitting even though the power is on?
If your Sharp Fax Machine is powered on but not transmitting, ensure the receiving machine has fax paper. Also, check that the telephone line cord is plugged into the TEL. LINE jack, and not the TEL. SET jack. If the receiving machine is in manual mode without an attendant, reception won't be possible. If the receiving machine isn't a Sharp model, ensure it's G3 compatible. Finally, check the display for any error messages.
How to make Sharp UX-108 receive documents automatically?
To enable automatic document reception on your Sharp Fax Machine, ensure that the reception mode is set to FAX. If you subscribe to a distinctive ring service, ensure the Distinctive Ring function is set to the correct ring pattern. If you don't subscribe to distinctive ring service, make sure Distinctive Ring is set to OFF SETTING.
Why is there no reception when polling with my Sharp Fax Machine?
If no reception occurs when polling is attempted with your Sharp Fax Machine, ensure you have not run out of fax paper and that the transmitting machine is in automatic reception mode. If the transmitting machine has polling security, make sure that your fax number has been entered both in your fax and in the transmitting machine.
Why does my Sharp UX-108 print documents in strips?
If a received document or copy prints out in strips on your Sharp Fax Machine, make sure the operation panel is completely closed by pressing down on both sides.
How to stop Sharp Fax Machine from interrupting voice calls?
If voice calls on an extension phone are interrupted by the fax, it might be because the reception mode is set to A.M. To prevent interruption on a touch-tone extension phone, press any three keys on the extension phone after answering. Do not enter the code to activate fax reception.
Why does Sharp Fax Machine not receive when power is on?
If your Sharp Fax Machine is powered on but not receiving, make sure that the wall jack is connected to the TEL. LINE jack, and not the TEL. SET jack.
Why are received images distorted on my Sharp UX-108?
If received images are distorted on your Sharp Fax Machine, noise on the telephone line may be the cause. Have the other party try sending the document again. The print head may also be dirty. Make a copy of another document; if the copy is also distorted, your fax may need servicing.
General| Type | Plain Paper Fax |
|---|---|
| Modem Speed | 9.6 Kbps |
| Paper Size | A4 |
| Paper Capacity | 50 sheets |
| Automatic Document Feeder | 10 sheets |
| Print Technology | Thermal Transfer |
| Transmission Time | 15 seconds per page |
Lists all items included in the fax machine packaging.
Explains the functions of the fax machine's control panel and keys.
Provides instructions for connecting the fax machine to power and phone lines.
Step-by-step guide for loading fax paper into the machine.
Instructions for inputting the fax machine's number and sender name.
Procedure for setting the current date, time, and daylight saving.
How to choose between TEL, FAX, and A.M. reception modes.
Adjusting speaker, handset, and ringer volume levels.
Specifies document size, weight, and restrictions for transmission.
Instructions on how to place documents into the feeder for sending.
How to adjust image quality for sending documents.
Steps to send a fax using manual dialing.
Instructions for sending faxes using stored numbers.
Automatically answers and receives faxes on four rings.
Requires manual answering for calls and faxes.
Procedure for answering calls using the fax handset.
How to handle calls using an extension phone.
How paper is cut after receiving documents.
Steps for making voice calls using standard dialing.
Using one-touch keys for voice calls.
Using stored numbers for voice calls.
Combining different dialing methods for calls.
Managing calls with hold and search functions.
Redialing last calls and placing calls on hold.
Steps to connect an answering machine to the fax.
Modifying the OGM to prompt fax transmission.
Steps to enable the answering machine function.
Explanation of the answering machine/fax interaction.
Using Caller ID to display incoming call information.
How the Caller ID feature works and displays information.
Accessing the list of recent calls.
Using Anti Junk Fax to block specific voice numbers.
Setting up different ring patterns for incoming calls.
Setting up the Anti Junk Fax feature to block specific numbers.
Requesting documents from other fax machines.
Scheduling fax transmissions or polling.
Sets default resolution for transmissions.
Configures how many rings before the fax answers.
Sets wait time between automatic redial attempts.
Sets the maximum number of automatic redials.
Customizes the code to start fax reception remotely.
Turns remote reception number detection on or off.
Determines when transaction reports are printed.
Sets the phone line dialing mode (tone or pulse).
Sets silence duration for fax takeover from answering machine.
Configures fax answering if the answering machine fails.
Configures fax answering based on ring patterns.
Enables reception upon hearing fax tones from extension phones.
Prevents reception from numbers in the Anti Junk List.
Configures Rapid Key 10/POLL for polling.
Enables or disables the Caller ID function.
How to print various lists like Timer, Telephone Number, etc.
Displays the current status of all option settings.
Lists numbers blocked by the Anti Junk Fax feature.
Shows recent unanswered calls and faxes.
Prints a report of operations after completion or error.
Instructions for cleaning the print head for optimal performance.
How to clean the scanning glass and rollers for image quality.
Instructions for wiping down the exterior of the machine.
Solutions for problems with the answering machine connection.
Remedies for line errors and communication failures.
Solutions for issues like no dial tone or failed dialing.
Fixes for issues with receiving or making copies.
Solutions for common issues like display or key response failures.
Explains various messages shown on the fax display.
Interpretation of beep sounds indicating fax status.
Procedures for removing jammed documents or paper.
