UX178U-SFPO
RT
<P=001>
Polling (Requesting a Fax Transmission)
Polling allows you to request another fax machine to send a document to
your fax machine. In other words, the receiving fax machine, not the
transmitting fax machine, initiates the transmission. You can use your fax to
both poll and be polled by others.
To use the polling function, you must first set Rapid Key 10/POLL for use as
a polling key. This is done by changing Option Setting 14, as described in
Chapter 8, "Option Settings".
Requesting transmission
Note: Rapid Dial Keys cannot be used for polling. To dial a Rapid Dial
location, press the SPEED DIAL key and then enter the 2-digit number
corresponding to the Rapid Key.
1
Dial the fax machine you want to poll
using one of the following methods:
•
••
• Pick up the handset (or press the
SPEAKER key) and dial the full
number. Wait for the fax answerback
tone.
•
••
• Press the SPEED DIAL key and enter
a 2-digit Speed Dial number.
•
••
• Enter the full number using the numeric
keys.
(Example)
SPEED DIAL
2
Press Rapid Key 10/POLL.
•
••
• If you used the handset, replace it when
POLLING appears in the display.
Reception will begin.
10/POLL
0 1
7. Special
Functions
Polling (Requesting a Fax Transmission)
57
To Next Page
Loading...
Need help?
General
