Sharp UX-108 User Manual

<P=002>
SETTING THE
DATE AND TIME
START
Press:
Display shows:
DATE & TIME SET
Press the
START
key:
Enter two digits for the Month (01 through 12).
Enter two digits for the Day (01 through 31).
Enter four digits for the Year (Ex: 1998).
Enter two digits for the Hour (01 through 12).
Enter two digits for the Minute (00 through 59).
Press the * key for A.M. or the
#
key for P.M.
When finished, press:
START
STOP
STORING AND CLEARING
NUMBERS FOR AUTO DIALING
1. Press:
Display shows:
FAX/TEL # MODE
2.
Press
1
to store a number or
2
to clear a num-
ber.
3. Enter a 2-digit Speed Dial number (from 01 to
10 for Rapid Key Dialing, or 11 to 30 for Speed
Dialing). (If you are clearing a number, go to
Step 7.)
4. Enter the full telephone/fax number.
5. Press:
STOP
START
6. Enter the name of the location by pressing num-
ber keys (max. of 20 characters). (Refer to the
letter entry table in
ENTERING YOUR NAME
AND NUMBER
.)
7. Press:
SENDING DOCUMENTS
Place your document
(up to 10 pages) face
down in the document
feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers,
ask them to press their Start key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission
will begin automatically.
Speed Dialing
1. Press:
2. Enter 2-digit Speed Dial number.
3. Press:
SPEAKER
SPEED DIAL
START
START
RECEIVING DOCUMENTS
START
Press:
FAX
mode: The fax automatically answers on four
rings and receives the incoming document.
TEL
mode:
RECEPTION
MODE
START
Fax
tone
RECEIVING
A.M.
mode: Select this mode when an answering
machine is connected to the fax and the answer-
ing machine is turned on.
FUNCTION
3
FUNCTION
3
FAX
TEL
A.M.
FAX
TEL
A.M.
FAX
TEL
A.M.
FEB 1 10:30
FEB 1 10:30
FEB 1 10:30
88

Sharp UX-108 Specifications

General

Brand	Sharp
Model	UX-108
Category	Fax Machine
Language	English