Why is the received document faint on my Sharp Fax Machine?
If your Sharp Fax Machine prints a faint received document, ask the sender to send documents with higher contrast. If it's still too low, your fax machine may need service. Try making a copy or printing a report to check your machine’s printing ability. Also, make sure you're using the recommended thermal paper.
What to do if Sharp Fax Machine displays LINE ERROR?
If the Sharp Fax Machine displays 'LINE ERROR', retry the transaction. If the error continues, ensure the cord from the TEL. LINE socket to the wall is no longer than two meters. Also, confirm that no modem devices share the line, the other fax machine functions correctly, and your telephone line is free of noise. Try a different telephone line. If problems persist, the fax machine may require service.
Why does Sharp UX-41 interrupt voice calls on extension phone?
If voice calls are interrupted by the fax on your Sharp Fax Machine, especially when using an extension phone, it might be because the reception mode is set to A.M. To prevent this on a tone dial extension, press any three keys on the extension phone after answering.
How to fix poor copy quality and dark lines on Sharp UX-41?
If your Sharp Fax Machine has poor copy quality or shows dark vertical lines, the scanning glass might be dirty. Clean the scanning glass.
What to do if Sharp Fax Machine power is on, but no transmission takes place?
If your Sharp Fax Machine is on but no transmission occurs, check that the receiving machine has paper and that the telephone line cord is plugged into the TEL. LINE socket, not the TEL. SET socket. Also, if the receiving machine is in manual mode without an attendant, reception won't be possible. Check the display for error messages and pick up the handset to check for a dial tone.
Why no reception occurs when polling is attempted on Sharp Fax Machine?
If your Sharp Fax Machine isn't receiving when polling is attempted, ensure you haven't run out of paper. Also, check that the transmitting machine is in automatic reception mode. If the transmitting machine uses polling security, verify that your fax number is entered in both machines.
Why automatic document feeding does not work on Sharp UX-41?
If the automatic document feeding on your Sharp Fax Machine isn't working for transmission or copying, check the size and weight of the document.
Why does Sharp UX-41 print in strips?
If your Sharp Fax Machine prints received documents or copies in strips, make sure the operation panel is completely closed by pressing down on both sides.
Why nothing appears in the display of my Sharp UX-41?
If nothing appears on the display of your Sharp Fax Machine, ensure the power cord is properly plugged into a power outlet. You can also test the outlet by connecting another electrical appliance to see if it receives power.
Why are received images distorted on Sharp Fax Machine?
If the received images from your Sharp Fax Machine are distorted, it could be due to noise on the telephone line. Ask the sender to resend the document. Try making a copy or printing a report on your fax machine. If the copy or report is also distorted, your fax machine may need service.
General| Paper Tray Capacity | 50 sheets |
|---|---|
| Print Technology | Thermal Transfer |
| Display | LCD |
| Type | Plain Paper Fax |
| Paper Size | A4, Letter |
| Automatic Document Feeder Capacity | 10 pages |
| Compression | MH |
To Next Page
