Blocking Reception of Unwanted Faxes
60
1 Press once and once.
2 Press twice.
3 Press to store an Anti Junk number, or to clear a previously
stored number.
4 Entering: Enter a 1-digit number from “1” to “5” with the numeric keys.
This number identifies the fax number that you will enter in the next
step.
Clearing: Enter the 1-digit number that identifies the fax number you
want to clear, and go to step 6.
5 Enter the fax number by pressing the number keys (max. 20 digits).
6 Press .
7 Return to Step 4 to enter (or clear) another fax number, or press
to return to the date and time display.
FUNCTION
3
1
2
START
STOP
Blocking Reception of Unwanted Faxes
The Anti Junk Fax function allows you to block reception of faxes from a party
that you specify. This saves paper by not printing out unwanted "junk" faxes.
To use this function, enter the fax numbers from which you do not want to
receive faxes as shown below.
♦ Up to five numbers can be entered in the Anti Junk Number List. To clear a
number from the Anti Junk Number List, you need to know the 1-digit
number which identifies it. If you have forgotten this number, print out the
Anti Junk Number List as explained in Chapter 8.
Display:
ENTRY MODE
STORE JUNK #
(Example)
1
all.bookPage60Friday,April5,200211:44AM
To Next Page
Loading...
Need help?
General
