Connections
11
1. Installation
Connecting the telephone line cord
Insert one end of the line cord into the socket on the back of the machine
marked TEL. LINE. Insert the other end into a wall telephone socket.
Dial mode:
The fax machine is set for tone
dialling. If you are on a pulse dial
line, you must set the fax
machine for pulse dialling. Press
the keys on the operation panel
as follows:
1 Press once and once.
2 Press 4 times.
3 Select the dial mode:
TONE: PULSE:
4 Press to exit.
FUNCTION
4
1
2
STOP
TEL.
LINE
Display:
OPTION SETTING
DIAL MODE
Comments:
♦ The fax machine is not designed for use on a line which has call waiting,
call forwarding, or certain other special services offered by your telephone
company. If you attempt to use the fax machine in conjunction with any of
these services, you may experience errors during transmission and
reception of facsimile messages.
♦ The fax machine is not compatible with digital telephone systems.
♦ If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
all.bookPage11Friday,April5,200211:44AM
To Next Page
Loading...
Need help?
General
