36
1 Load the document(s).
• If desired, press to set the
resolution and/or contrast.
2 Press and then .
3 Enter the first letter of the stored name by pressing the appropriate
number key (the key below the marked letter) one or more times until the
letter appears in the display. If the name begins with a special character
or number, press .
• If you don’t remember the first letter, go to Step 4 (you will scroll through the
list from the beginning).
• If a name wasn’t stored for the number, press . This will cause
numbers, not names, to appear when you scroll.
4 Press or to scroll through the names (numbers if you pressed
0). Stop when the desired name appears in the display.
5 Press . The document will be automatically transmitted once the
connection is established.
RESOLUTION/
RECEPTION MODE
HOLD/
SEARCH
1
1
0
START
READY TO SEND
Searching for an auto-dial number
If you don’t remember the Rapid Key or Speed Dial number in which you have
programmed a particular fax number, you can search for the number by following
the steps below. Once you have found the number, you can dial and transmit the
loaded document by simply pressing .
START
all.bookPage36Friday,April5,200211:44AM
To Next Page
Loading...
Need help?
General
