UX178U-SFTI
YF
<P=001>
Timer Operations
The Timer function allows you to set a transmission and/or polling operation
to be performed automatically at a time you specify. One transmission
operation and one polling operation can be set at any one time, and the times
they will be performed can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of lower
nighttime telephone rates without having to be there when the operation is
performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press the keys shown at right.
TIMER MODE will appear in the display.
1
FUNCTION
2
Press # to set a transmission operation
(SEND MODE), or * to set a polling
operation (POLLING MODE).
or
3
Press 1 to select SET.
4
Enter the time at which you want the
operation to take place (2 digits for the
hour and 2 digits for the minute).
Example: 9:25
5
Press the * key to select A.M. or the #
key to select P.M.
or
6
Press the START key.
1
0
9 2 5
START
Timer Operations
60
To Next Page
Loading...
Need help?
General
