<P=002>
7
Enter the Speed Dial number of the
receiving fax machine.
•
••
• If this is a polling operation, go to Step
10.
(Example)
8
Press the START key.
9
Adjust the resolution and/or contrast
(skip this step if you don’t want to
change settings).
10
Press the START key and then the STOP
key. If this is a transmission operation,
load the document in the feeder sometime
before the specified time of transmission.
To cancel an operation
If you need to cancel an operation after it has been set, follow the steps below.
1
Press the keys shown at right.
TIMER MODE will appear in the display.
2
Press # to cancel a transmission
operation, or * to cancel a polling
operation.
or
3
Press 2 to select CLEAR.
4
Press the START key and then the STOP
key.
1
FUNCTION
0
5
START
START
RESOLUTION
2
STOP
START
STOP
7. Special
Functions
Timer Operations
61
To Next Page
Loading...
Need help?
General
