Sharp UX-108 User Manual

<P=003>
Setting 5: TEL/FAX REMOTE NUMBER
If you hear a fax tone when you answer a call on a touch-tone extension phone
connected to the same line as the fax, you can make the fax begin reception by
pressing 5, * , and * on the phone. Use this setting if you want to use a number
other than 5 to begin fax reception. You can enter any number from 0 to 9.
•
Initial setting: 5
STOP
FUNCTION
4
Press
until
display
shows:
TEL/FAX REMOTE #
Enter a number
from
0
to
9
REMOTE RECEPTION
Setting 6: REMOTE RECEPTION SELECT
If you don’t intend to use the above TEL/FAX REMOTE NUMBER, you can
turn detection of the number off. This will ensure that the fax never mistakenly
attempts to begin reception if it detects a signal similar to the TEL/FAX
REMOTE NUMBER while you are talking on an extension phone. Press 1 to
turn detection on, or 2 to turn detection off.
•
Initial setting: 1
FUNCTION
4
Press
until
display
shows:
REMOTE RECEPTION
STOP
2 1
YES NO
or
TRANSACTION LIST
Setting 7: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number
from 1 to 4 as follows:
1 (ALWAYS PRINT): A report will be printed after each transmission,
reception, or error.
2 (ERR/TMR PRINT): A report will be printed after an error or a timer
operation.
3 (SEND ONLY): A report will be printed only after a transmission.
4 (NEVER PRINT): A report will never be printed.
•
Initial setting: 2
STOP
FUNCTION
4
Press
until
display
shows:
TRANSACTION PRINT
Enter a number
from
1
to
4
DIAL MODE
Option Settings
64

Sharp UX-108 Specifications

General

Brand	Sharp
Model	UX-108
Category	Fax Machine
Language	English