E-9
ENGLISH
OPERATION
FP-A80U
FP-A60U
1
Press to start / stop.
Unless the power cord has been unplugged,
the operation starts in the previous mode it
was operated in.
FP-A80U
2
Press to select fan speed.
3
Press to turn Plasmacluster
Ion Mode ON and OFF.
Press to start Quick Clean Mode..
The unit will operate at HIGH fan speed for
15 minutes, then will return to the prior operation.
"QUICK CLEAN" mode is effective when you
would like to clean quickly.
CLEAN SIGN
(FP-A80U)
The Dust Sensor automatically moni-
tors dust pollution level and adjusts
fan speed accordingly.
Green
Yellow
Red
Clean
Very Impure
ON
OFF
3 2 1
QUICK CLEAN Operation
Light Control
Press for 3 seconds to select
ON/OFF of the Plusmacluster
SIGN and the CLEAN SIGN.
FP-A60U
AUTO mode
*The air purifier operates the airflow speed
automatically according to the interior
pollution level detected by the sensor.
OM_FP-A80U_A60U-EN+SP.indb 9 8/5/11 9:42:22 AM
To Next Page
Loading...
Need help?
General
