ENGLISH
E-17
Power supply 220 V 50 Hz
Fan
Speed
Operation
Fan Speed Adjustment MAX MED SLEEP
Rated Power 33W 14W 3.7~6.2W
Fan Speed 240m
3
/hour 150m
3
/hour 48~90m
3
/hour
Recommended Room Size ~30m
2
*1
High density Plasmacluster ion recommended room size
~23m
2
*2
Cord Length 2.0m
Dimensions 391mm(W)x281mm(D)x540mm(H)
Weight 5.8kg
*1 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*2 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the fl oor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
SYMPTOM REMEDY (not a malfunction)
GLUE SHEET Lamp is fl ashing
• Peel off one of layer or exchange the whole Glue Sheet set
when all layers have been used.
Then, press the Mosquito Catcher button for 3 sec.
No mosquitoes are collected on the
Glue Sheet.
• Try relocating the unit.
• Peel off one of layer or exchange the whole Glue Sheet set.
When the adhesive remains on
clothes, skin, fl oor, etc.
• Wipe with cooking oil, then wash with soap and water.
SLEEP lamp is fl ashing.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
SPECIFICATIONS
OM_FP-FM40Y_ID-EN.indb Sec1:17OM_FP-FM40Y_ID-EN.indb Sec1:17 7/27/2558 BE 5:51 PM7/27/2558 BE 5:51 PM
To Next Page
Loading...
Need help?
General
