Sharp FV-DB2E - DAB Time Shift Playback Control; Pausing and Resuming DAB Playback; Holding DAB Content for Playback

13
FV-DB2E
05/4/21 FVDB2E_UK.fm
TINSEA048SJZZ
DAB Operation
" Pause in the time shift mode
To cancel the pause mode:
Press the TIME SHIFT button.
Note:
If the memory becomes full in the pause mode, playback starts
automatically from where the button was pressed. The memory is
continually refreshed.
" Hold in the time shift mode
To cancel the hold mode:
Press the TIME SHIFT button.
1 Whilst receiving a DAB station, press
the TIME SHIFT button to enter the time
shift mode.
2 Press the button at the desired posi-
tion.
! Sound is not heard in the pause mode.
! Elapsed time (shown as "-** : **") increases and the white
block moves to the left.
! DAB broadcasts are stored until the memory is full.
3 Press the button to start playback.
Elapsed time remains the same.
1 Whilst receiving a DAB station, press
the TIME SHIFT button to enter the time
shift mode.
2 Press the button.
! Sound is not heard in the hold mode.
! Data in memory will be retained until the hold mode is can-
celled.
3 Press the or button to select a playback position.
Release the button to start playback.
! The white block indicates the current position.
! To reverse, move the white block to the left by pressing the
button repeatedly.
! To move forward, move the white block to the right by press-
ing the button repeatedly.
! In the hold mode, you can play stored data as many times as
you want.
ForwardRewind
White block
3