21
FV-DB2E
05/4/21 FVDB2E_UK.fm
TINSEA048SJZZ
Advanced Features
Enhancing your system
" Connecting to a stereo system, etc.
You can enjoy the sound through a stereo system by connecting to
the unit with an audio cable.
Notes:
! Plug in each cable fully to prevent noise interference.
! Refer to the manual for the connected equipment.
! The unit produces both DAB and FM sound.
" Headphones
! Before plugging in or unplugging the headphones, reduce the vol-
ume.
! Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the volume control.
Turn off all other equipment before making this connection.
Stereo system, etc. Headphones
To audio input
sockets
Audio cable
(commercially available)
5
To Next Page
Loading...
