EN-12
1. Turn the product OFF.
2. Select
Set
Press for 3 sec.
♪
♪
HOW TO CHANGE VARIOUS SETTINGS
You can change the functions listed in the table below.
Function (
) Setting ( )
Light control
You can select the brightness of the front display
and air quality monitor.
Turn off *
Dim
Auto
(default)
Light automatically switches based on room brightness.
Room
brightness
Front Display and Air Quality Monitor
ALL MODE
(Except SLEEP)
SLEEP MODE
Bright ON Dim
Dark Dim Turn o
Auto resume
This model has Auto Resume function, where
the operation resumes at the previous operation
mode and settings if the power is restored.
Cancellation
ON
(default)
Adjusting sensor sensitivity (F3-F5)
For details, refer to Page 16.
Light sensor
Low
Sensitive dust sensor
Standard
(default)
Odor sensor
High
*
When set to “Turn off”, the “Dim” light illuminates for 8 seconds after operation starts and then the light turns off.
3. Select “Function Number”.
GO BACK GO FORWARD
or
Set
♪
4. Select “Setting Number”.
GO BACK GO FORWARD
or
Set
♪
～
5. Finish the setting.
♪
♪
････
♪
♪
Turn off
♪
～
OPERATION 3
*
For details on selecting A, refer to
Page 19 - 21.
See below table for
functions.
See below table for
settings.
♪
♪
♪
♪
♪
♪
*
Product
setting
Wi-Fi
setting
• You can select F or A.
FX-J80U_2nd_EN.indd 12 2019/12/20 14:34:09
To Next Page
Loading...
Need help?
General
