ENGLISH
EN-21
OTHER SETTINGS 4
1. Select by following Steps 1 - 4
on page 19.
2. After displaying for a while,
network status of Wi-Fi adapter will
be displayed.
3. Complete
♪
Connection is stable
Wi-Fi adapter is off
Please turn on Wi-Fi adapter.
Router is not registered
Please perform the Wi-Fi connection with
the router.
Link settings with the App is not performed
Please perform the link setting with the
smartphone.
Wi-Fi adapter network error
Please turn off Wi-Fi adapter and turn on
again after a while.
Network error between the air purifier and
the router
Please confirm the network status of the
router.
Network service error
Please turn off the air purifier and confirm
the internet status, then try again.
1. Select by following Steps 1 - 4
on page 19.
2. Perform Wi-Fi connection of the air
purifier and the router based on the
App screen.
Refer to the App or the Wi-Fi Connect
Guide for further operations.
and blinks while setting the
connection between the product and the router.
Once connected, receiver level will be displayed.
A connection error is occuring if is displayed.
Please confirm the router and try again.
weak strong
Light up
Display Wi-Fi network
status
AP (Access Point) mode
HOW TO CHANGE VARIOUS SETTINGS 3
SPECIFICATIONS
Wireless LAN: IEEE802.11b/g/n
Frequency range: 2.4GHz frequency band
FX-J80U_2nd_EN.indd 21 2019/12/20 14:39:16
To Next Page
Loading...
Need help?
General
