Sharp HT-CN410DVH

HT-CN410DVH
4
SPECIFICATIONS
l General
l Amplifier
l DVD player
l Tuner
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
Power source AC 230 V, 50 Hz
Power consumption
Power on: 45 W
Power stand-by:0.6W
Dimensions
Width: 428 mm
Height: 55 mm
Depth: 360 mm
Weight 3.8 kg
Audio input terminals Analogue input (IN 1): RCA type × 1 pair (L/R)
Analogue input (IN 2): RCA type × 1 pair (L/R)
Audio output terminals
Analogue output (OUT): RCA type × 1 pair (L/R)
Headphone: 16-50 ohms (recomended: 32 ohms)
Digital output: Caoxial type x 1
Video output terminals
S-video output: S-terminal × 1
Video output: RCA type × 1
Component video output: P
B, PB, Y
Video output terminals SCART output: SCART terminal x 1
Output power Front speakers: RMS: 42 W (21 W + 21 W) (DIN 45 324)
Centre speaker: RMS: 21 W (DIN 45 324)
Surround speakers: RMS: 42 W (21 W + 21 W) (DIN 45 324)
Subwoofer speaker: RMS: 45 W (DIN 45 324)
Signal system PAL/NTSC colour
Supported disc types
DVD (with the same region number on the back of the unit or ALL), SVCD, VCD, audio CD,
CD-R, CD-RW, MP3
Video signal Horizontal resolution: 525 lines S/N ratio: 56 dB
Audio signal Frequency characteristics Linear PCM DVD: 20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
S/N ratio CD: 65 dB (1 kHz)
Dynamic range Linear PCM DVD: 95 dB CD: 94 dB
Total harmonic distortion ratio 0.2 % maximum
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1620 kHz