Sharp HT-SB30

E-15
Cleaning the cabinet■
Periodically wipe the cabinet with a soft cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint
thinner, etc.). It may damage the cabinet nish.
Do not apply oil to the inside of each component.
It may cause malfunctions.
SURROUND
-
+
SOUND BAR HOME THEATER SYSTEM HT-SB30
ON/STAND-BY
SOURCE
PAIRING
VOLUME
●
Maintenance
As part of our policy of continuous improvement,
SHARP reserves the right to make design and
specication changes for product improve-
ment without prior notice. The performance
specication gures indicated are nominal
values of production unit. There may be some
deviations from these values in individual unit.
General■
Power source DC IN 17V 2.8A: AC/DC
adaptor
(AC 100 - 240V ~ 50/60Hz)
Power
consumption
10W
Maximum
output power
RMS: Total 40 Watts
20 Watts per channel into
6 ohms at 1 kHz, 10% total
harmonic distortion
FTC: Minimum 14 watts
per channel into 6 ohms at
100 Hz to
20 kHz, 1% total harmonic
distortion
Speaker 2-way Speaker System
2-1/4” (5.7cm) Woofer
1” (2.5cm) Soft Dome
Input
terminals
Analog input (AUDIO IN):
Stereo mini jack Ø 3.5mm
500mV / 47kohms
Frequency
Band
(HT-SB30)
2.400GHz - 2.480GHz
Compatible
Bluetooth
Prole
(HT-SB30)
A2DP (Advanced Audio
Distribution Prole), AVRCP
(Audio/Video Remote Control
Prole)
Bluetooth 2.1 +EDR
Dimensions Width: 37” (940mm)
Height: 2-7/8” (73mm)
Depth: 3-1/4” (83mm)
Weight 5.07lbs. (2.3kg)
Specications