E-6
Sound bar connections to TVs
Caution:
Turn off all other equipment before making any connections.
Notes:
●To connect to TV, use Audio IN terminals located at the rear of the sound bar.
●Refer the operation manual of the equipment to be connected.
●Fully insert the plugs to avoid fuzzy pictures or noises.
●In some cases, a small background noise could emit from the sound bar, when you
use the RCA audio output terminal connection from a TV-Set/DVD/Blu-ray Disc
Player. In such case, please change the connection to the headphone terminal
connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand,
model and age, and it is not a quality matter from the sound bar.
●If the TV volume is continuously at low level, the sound bar will automatically
power off. Increase the TV output volume to enjoy the sound from the speaker.
Connecting a TV, or DVD player, etc.
■
If the TV/monitor has an audio output, connect it to the Audio IN jack on the rear
of the sound bar.
HT-SB30
To select AUDIO IN function:
Press INPUT button repeatedly.
To select Bluetooth function:
Press INPUT button repeatedly. (PAIRING indicator turns blue.)
Audio cable
(not supplied)
To AUDIO
IN jack
Audio signal
To HEADPHONE
terminal
To audio output terminals
TV
or
Blu-Ray/DVD player/
Digital Tuner
Sound bar
Audio cable
To Next Page
Loading...
Need help?
General
