OPTICAL input
Use the optical cable to connect the optical input of this sound bar to the optical output of VCD, CD, VCR, DVD
player.
TIPS:
While in HDMI/ARC/OPTICAL mode, if there’s no sound output from the unit, you may need to activate PCM
signal output on your source device (eg. TV, DVD or Blu-ray player).
AUX IN
A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s audio output sockets to the AUX IN socket on
the unit.
B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the TV’s or external audio device headphone socket
to the AUX IN socket on the unit.
TIP:
When you use the headphone output on the TV set, you will be able to adjust the volume level directly using the TV
remote control.
To Next Page
Loading...
