SYMPTOM REMEDY (not a malfunction)
When the Roller / Float / Tray partition was
removed.
• Install the Roller / Float / Tray partition in order
below.
AUTO RESTART
After a power failure, automatically resume
the operation when the power recovers.
Auto Restart can be set.
• Even when the plug is unplugged or the breaker is
thrown during the operation, the operation resumes
at the previous operation mode and settings if the
power recovers.
E-17
ENGLISH
FLOAT
ROLLER
1. Insert the fl oat
under this tab.
2. Inner the tab
of fl oat into
the hole.
3. Insert the tab on the
other side of the fl oat
into the hole.
Float
Tab
Float
Cross-Section view
(with the unit OFF)
ON
(with the unit OFF)
CANCELLATION
(simultaneously for more 3 sec.)
If the , , lamp lights up
for 10 seconds, the setting is
complete.
(simultaneously for more 3 sec.)
Fix the roller in the tray from side way.
Humidifying tray
Tray partition
Click
KC-D60 40E_EN (MA+CS).indd Sec1:17KC-D60 40E_EN (MA+CS).indd Sec1:17 10/29/13 5:15 PM10/29/13 5:15 PM
To Next Page
Loading...
Need help?
General
