ENGLISH
E-7
REFILLING THE HUMIDIFYING TRAY
The unit can be used even without water in the Humidifying Tray.
Pull out the Humidifying Tray.
Install the Humidifying Tray.
Fill the Humidifying Tray with tap
water by method
A
or
B
.
CAUTION
CAUTION
CAUTION
CAUTION
Clean the Humidifying Tray if it becomes
dirty or there is a noticeable odor.
(Ref. E-12,E-13)
• When carrying the Humidifying Tray, hold it
with both hands or grip the Tray Handle.
• Gently fi ll it with water to avoid splash
water.
• Do not fi ll beyond the “FULL” indicator.
• Return the Tray Handle
to its original position
before installing.
• Do not expose the unit to water. Doing so can cause a short circuit or electrical shock.
• Use only fresh tap water. Using other water sources risks the growth of molds, fungi, or bacteria.
• Do not use hot water (40 ºC), chemical agents, aromatic substances. Doing so can deform the unit or
cause it to malfunction.
• When removing and installing the Humidifying Tray, be careful not to spill any water.
A
B
FULL
FULL
OR
To Next Page
Loading...
