How to reset the filter indicator light on my Sharp KC-F32EU?
If the Filter Indicator Light is on, when replacing the filters in your Sharp Air Cleaner, connect the power cord to an outlet and then press the Filter Reset Button.
What to do if the Dust Sign light is orange or red on my Sharp KC-F32EU Air Cleaner even when the air is clean?
If the Dust Sign light on your Sharp Air Cleaner remains orange or red even when the air seems clean, it could be due to dirty or clogged dust sensor openings interfering with the sensor's operation. Gently clean the back panel to resolve this issue.
Why does my Sharp KC-F32EU Air Cleaner have an odour?
If the air discharged from your Sharp Air Cleaner has an odour, the filters might be extremely dirty and need cleaning or replacing. Also, Plasmacluster Air Purifiers emit small traces of ozone that can produce an odour.
How to eliminate persistent odour and smoke from my Sharp Air Cleaner?
If odour and smoke persist when using your Sharp Air Cleaner, check the filters. If the filters appear extremely dirty, you should clean or replace them.
What to do if my Sharp Air Cleaner doesn't work with cigarette smoke?
If the unit does not operate when cigarette smoke is in the air, check if the Sharp Air Cleaner is installed in a location that makes it difficult for the sensors to detect cigarette smoke. Also, check to see if the dust sensor openings are blocked or clogged, and if they are, clean the back panel.
What to do if the Dust Sign light is green on my Sharp KC-F32EU even when the air is not clean?
If the Dust Sign light on your Sharp Air Cleaner is green even when the air is not clean, unplug the unit, wait one minute, and then plug it in again.
Why are the Dust Sign lights off on my Sharp KC-F32EU?
If the Dust Sign lights are turned off on your Sharp Air Cleaner, check to see if the Lights OFF Mode is selected. If it is selected, press the Light ON/OFF Button to turn the indicator lights on. Also, check to see if the SLEEP mode is selected.
Why is the water level not decreasing in my Sharp Air Cleaner's Humidifying Tray?
If the water level in the Humidifying Tray does not decrease or decreases slowly on your Sharp Air Cleaner, check to see if the Humidifying Tray is correctly installed and also check the Humidifying Filter. If the Humidifying Filter is extremely dirty, clean or replace it. Note that the humidification amount gets lower when humidity reaches the proper amount (55 ~ 65%) due to the humidity sensor when the fan speed is set to automatic.
Why doesn't the Humidify Light turn off on my Sharp KC-F32EU Air Cleaner when the tray is empty?
If the Humidify Light does not turn off when the Humidifying Tray is empty on your Sharp Air Cleaner, clean the Humidifying Tray and make sure that the unit is on a level surface.
Why do the Dust Sign lights change colour frequently on my Sharp KC-F32EU Air Cleaner?
The Dust Sign lights on your Sharp Air Cleaner automatically change colour when the dust sensor detects impurities.
General| Humidification Method | Evaporative |
|---|---|
| Water Tank Capacity | 2.5 L |
| Humidification function | Yes |
| Dust sensor | Yes |
| Odor sensor | Yes |
| Type | Air Purifier |
| Filter Type | HEPA |
| Air purification technology | Plasmacluster Ion |
To Next Page
