EN-7
ENGLISH
FILTER INSTALLATION
1. Remove the Back Panel.
2. Remove the plastic bag from the
each filter.
3. Install the filters in the correct order
as shown.
4. Install the Back Panel.
Back Panel
HEPA Filter Deodorizing Filter
HEPA Filter
Deodorizing Filter
Tag
Always be sure to remove the power plug
from the wall outlet.
1. Remove the Water Tank.
2. Fill the Water Tank with the tap
water.
3. To prevent leaks, securely tighten
the Tank Cap.
4. Install the Water Tank.
Click
Click
Tank Handle
Water Tank
Tank Cap
PREPARATION
NOTE
• When replacing the lter, making a memo of
the start of use date is recommended.
REFILLING THE WATER TANK
KI-L60TA_EN.indd 7 2020/08/28 15:47:51
To Next Page
Loading...
